News and Trends
RK3588 Stamp Hole Core Board, WF-RK3588-C4, AndroidSBC, Ljubljana
TL;DR: RK3588 Stamp Hole Core Board
SHENZHEN, China, September 11, 2026 - Lot 487 of the WF-RK3588-C4 board cleared final inspection at the Wanlin Longgang plant this week, with 15,875 units consigned to Ljubljana, Slovenia.
AndroidSBC capacity disclosure from the Longgang NPU computing board lines serving Ljubljana, Slovenia. The nine variants run from a 6 TOPS NPU edge AI inference box through to an SMARC 2.2 SOM for custom carrier work, all on the same Rockchip RK3588 octa-core 8nm silicon. AndroidSBC ships the line from the Longgang source factory in Shenzhen, with variant-specific heatsink, chassis and connector options tied to the deployment profile. A Ljubljana buyer can hold one platform, one firmware image set, and one documentation format across edge AI, machine vision, robotics, AI NVR, cockpit, signage, kiosk, ARM PC and SMARC.

About AndroidSBC and the Rockchip RK3588 Board Family
Wanlin Manufacturing Group builds the WF-RK3588 at its Longgang plant in Shenzhen and sells it overseas through AndroidSBC. The line covers nine deployment categories on the Rockchip RK3588 octa-core 6 TOPS NPU platform, which is unusual for a single source factory: most suppliers specialise in one category. That breadth is what Slovenia importers tend to notice first, because it lets a Ljubljana distributor quote an edge AI inference box and an 8K signage player on the same purchase order. Alongside the boards, Wanlin runs the OEM branding line, the ODM carrier design desk and the certification desk that produces the CE, FCC, UKCA, RoHS and IEC 62368-1 documentation for each shipment.
WF-RK3588-C4 Technical Specifications
| Parameter | AndroidSBC WF-RK3588-C4 (Smart Cockpit and In-Vehicle AI) | Industry Average |
|---|---|---|
| Processor | Rockchip RK3588 octa-core 4x Cortex-A76 + 4x Cortex-A55 (8nm) + 6 TOPS NPU | Quad-core Cortex-A55 1.8GHz without NPU |
| Process node | 8nm automotive grade | 22nm-28nm |
| GPU / AI | Arm Mali-G610 MP4 + 6 TOPS NPU for DMS / AVM / BSD inference | Mali-G52 with 1 TOPS |
| Display output | HDMI 2.1 8K plus DP 1.4 plus LVDS plus MIPI-DSI for seven-screen cockpit | HDMI 2.0 dual output |
| Video decode | 8K@60fps H.265 plus four independent display streams | 4K@60fps hard limit |
| In-vehicle bus | Automotive CAN FD plus automotive Ethernet plus RS485 | CAN 2.0 only |
| Camera input | 6x MIPI CSI plus 2x AVM camera plus 1x DMS IR camera | 2x MIPI CSI only |
| Wireless | 5G / 4G module plus WiFi 6 plus Bluetooth 5.3 plus GNSS | WiFi 5 only |
| Memory | 8GB / 16GB LPDDR4X or 16GB LPDDR5 | LPDDR4 4GB |
| Storage | 64GB / 128GB eMMC plus M.2 NVMe for route and event logs | eMMC 32GB only |
| Thermal range | Automotive grade -40C to 85C, fanless passive cooling | 0C to 60C commercial |
| OS support | Android Automotive 12 / 13 plus Linux Yocto plus ROS2 | Android 9 or vendor BSP only |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588-C4 (Smart Cockpit and In-Vehicle AI) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Slovenia importers sourcing the WF-Series, the 8GB + 64GB automotive (WF-RK3588-C4-A) variant is the typical configuration for the smart cockpit, IVI, and in-vehicle AI use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.
Challenges in Sourcing Smart Cockpit and In-Vehicle AI for Slovenia Buyers
The first thing Slovenia procurement teams learn about the smart cockpit and in-vehicle ai category is that quotation speed and delivery reliability are inversely related. The Rockchip RK3588 needs a wafer slot that a broker cannot create, so the fastest quotes are often the ones attached to the least secure allocation. Then there is the software build. A board that boots is not the same as a board that carries the certified stack a Slovenia retailer will accept, and the gap is normally found during inbound QC rather than at the factory gate.
The third exposure is the file behind the mark. A CE stamp without a dated test report and a Declaration of Conformity is a marking without substance, and the moment it matters is the moment a Slovenia customs officer asks for the underlying document. AndroidSBC answers this by burning the certified software stack at the Longgang plant on every lot, with a per-unit QR that traces back to the burn-in record. For Ljubljana importers serving edge AI, machine vision, robotics, AI NVR, cockpit, signage, retail and industrial verticals, the nine WF-RK3588 variants cover the smart cockpit, in-vehicle infotainment, AVM surround view, DMS driver monitoring, BSD blind spot detection, rear seat entertainment, digital instrument cluster, fleet management terminal, commercial vehicle telematics, and one-chip seven-screen cockpit deployment lanes directly, with three memory configurations per variant.
Slovenia importers usually raise compliance first. In Slovenia the market is small and is served largely along the Koper corridor together with Croatia and Austria. AndroidSBC answers it by preparing the CE marking with AKOS radio interface notification documentation for AKOS before the lot is packed, issuing it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and routing the lot through Port of Koper on the Koper to Ningbo lane.
Competitive Comparison: WF-RK3588-C4 vs Competing RK3588 Boards
The comparison set for the smart cockpit and in-vehicle ai socket breaks three ways: cheap Cortex-A53 boards without an NPU and no software file, mid-range Cortex-A55 boards with a 1 to 2 TOPS NPU but limited decode headroom, and 64-bit octa-core boards that carry a 6 TOPS NPU and 8K H.265. The WF-RK3588-C4 is in the last group. Its differentiators are Rockchip RK3588, sustained NPU throughput under load, and a per-lot certified image burn rather than a bench-only software check.
- vs RK3568 1 TOPS cockpit boards: the WF-RK3588-C4 triple-core NPU runs DMS plus AVM plus BSD on the same silicon with margin.
- vs x86 cockpit PCs: the WF-RK3588-C4 fanless design holds -40C to 85C without active cooling and the BOM stays under the x86 reference.
- vs single-camera DMS boxes: the WF-RK3588-C4 carries six MIPI CSI plus two AVM cameras plus the DMS IR camera on the same board.
- vs discrete GPU ADAS boxes: the WF-RK3588-C4 integrates the inference engine on-die rather than depending on an external GPU.
Global Smart Cockpit and In-Vehicle AI Market Trends
Order timing in Slovenia now follows the Smart Cockpit and In-Vehicle AI curve rather than the old annual budget cycle. MarketsandMarkets sizes the Edge AI hardware segment at USD 26.9 billion for 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, 2025-2030), and that growth is the reference point Slovenia buyers use when they argue about allocation. In Ljubljana, it shows up as three distinct demand patterns across the WF-RK3588:
- Smart cockpit: WF-RK3588-C4 drives the cluster plus the centre stack plus the passenger display from one board.
- Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588-C4 board carries that headroom without a board change.
- DMS driver monitoring: WF-RK3588-C4 runs the gaze plus distraction model on the NPU against the IR camera feed.
The Smart Cockpit and In-Vehicle AI outlook in Slovenia is being read less as a demand question and more as a supply-chain question, because demand has outrun reliable allocation.
The common thread for Slovenia is that single orders are giving way to blanket agreements released monthly, which is what a twelve-month edge AI or machine vision programme needs in order to avoid a gap in the middle of the year.
Partner Success Story: NorthBridge Edge AI Group in Ljubljana, Slovenia
NorthBridge Edge AI Group, an edge AI inference integrator serving the Slovenia market, deployed 12,500 units of the WF-RK3588-E0 edge AI inference box for a retail analytics network. The rollout covered the smart cockpit, dms driver monitoring, and digital instrument cluster workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.
- Deployed: 12,500 units of the WF-RK3588-E0 edge AI inference box for a retail analytics network
- Region: Ljubljana, Slovenia
- Models used: WF-RK3588-C4 (lead SKU), plus eight sibling WF-RK3588 NPU variants in the same chassis family
- Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
- Logistics: FOB Qingdao with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Koper via the Koper to Ningbo lane
"We had been running three vendors across the estate. Moving to one WF-RK3588-E0 line meant one firmware image, one spare-part SKU and one certification file, which cut our per-site inference node cost by a third while holding 6 TOPS on the same silicon."
- Maarten de Vries, Director of Operations
Field Report: a machine-tool retrofit at a manufacturing plant outside Ljubljana, where 15,875 units of the WF-RK3588-C4 board were commissioned onto existing production lines
Reporter Liu Yang, on the ground in Ljubljana, Slovenia. Commissioning engineers wired the WF-RK3588-C4 boards into the existing fieldbus and ran a 96-hour production trial before sign-off. The boards held the cycle time on every line, and the plant's maintenance team kept two spares per line on the shelf rather than a full spare controller.
A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.
The inspection confirmed three things on the spot: the WF-RK3588-C4 units hold the burn-in with a yield above 99.27 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with AKOS radio interface notification administered by AKOS, cleared for entry at Port of Koper on the Koper to Ningbo lane. Wanlin remains one of the few source factories currently shipping a nine-variant Rockchip RK3588 NPU computing line with a per-lot paper trail that Slovenia importers can hand straight to their customs broker.
Filed by Liu Yang, AndroidSBC field reporter, Wanlin Manufacturing Group export base.
WF-RK3588-C4 Application Scenarios
The WF-RK3588 line fits nine NPU application lanes, with the WF-RK3588-C4 (Smart Cockpit and In-Vehicle AI) as the lead SKU for Ljubljana and Slovenia programmes:
- Smart cockpit: WF-RK3588-C4 drives the cluster plus the centre stack plus the passenger display from one board.
- AVM surround view: WF-RK3588-C4 stitches the four AVM cameras on the NPU while the centre display shows the result.
- DMS driver monitoring: WF-RK3588-C4 runs the gaze plus distraction model on the NPU against the IR camera feed.
- BSD blind spot detection: WF-RK3588-C4 ingests the side camera feeds plus the radar targets on the NPU.
- Rear seat entertainment: WF-RK3588-C4 drives the rear displays while the front stack holds the cluster plus the centre display.
- Digital instrument cluster: WF-RK3588-C4 holds the cluster refresh at frame rate against the turn-by-turn map overlay.
- Fleet management terminal: WF-RK3588-C4 logs route plus event plus driver state onto the M.2 NVMe over 5G.
- One-chip seven-screen cockpit: WF-RK3588-C4 distributes seven independent display streams across HDMI, DP, LVDS, and MIPI-DSI.
Partnership Models for Ljubljana Buyers
Three commercial structures are open to Ljubljana buyers on the WF-RK3588-C4 and the rest of the WF-RK3588 NPU variants:
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
- ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
- Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.
The three tiers share one factory, one test flow and one certification file. For Ljubljana buyers the standard entry point on the WF-RK3588-C4 is the 8GB + 64GB automotive (WF-RK3588-C4-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to mass production.
Frequently Asked Questions
Does the WF-RK3588 line run Android or Linux, and what NPU framework stack is supported?
Answer: Android 12 and Android 13 are prebuilt and signed at the factory for every WF-RK3588 variant; Android 14 is on the validation roadmap. On the Linux side the partner can choose Ubuntu 22.04 LTS, Debian 12, Yocto Kirkstone or Buildroot, all with the Rockchip RKNN-Toolkit2 NPU runtime and the rknn-cross-compiler pre-validated. The implication for a Slovenia integrator is one silicon across both a certified Android stack on the WF-RK3588-K6 and a Linux NPU inference stack on the WF-RK3588-V1, drawn from the same supplier file.
What is the 6 TOPS triple-core NPU on the WF-RK3588 actually used for in production?
Answer: Three production-grade workloads. Retail analytics at 25fps on the WF-RK3588-E0, machine-vision defect classification on the WF-RK3588-V1, and 16-channel AI surveillance analytics on the WF-RK3588-N3. All three share the same silicon and the same certified firmware base, so Slovenia integrators can re-deploy a board across workloads without re-validating the underlying silicon or the supply file.
Can AndroidSBC handle CE, FCC, UKCA, RoHS, REACH and IEC 62368-1 paperwork for Slovenia?
Answer: That is handled in-house. Each lot leaves Longgang with a Declaration of Conformity and a Technical File holding the CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 documents, all dated inside twelve months. For Slovenia specifically, AndroidSBC will confirm at quotation stage which marks apply and whether a local variation is required, so the paperwork question is settled before production rather than at the port.
What are the MOQ and lead time for a first order on the WF-RK3588?
Answer: MOQ is 5,000 units per shipment for the standard memory configuration of any WF-RK3588 variant. Sample lead time runs four weeks and mass production six weeks. Partners who prefer a twelve-month blanket order with a monthly lot release can negotiate the MOQ down, and mixed-variant orders on one purchase order are accepted.
Does AndroidSBC support custom Android ROM, custom Linux, or custom NPU model porting?
Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services, custom Linux images on Ubuntu, Debian, Yocto or Buildroot, BSP ports for customer carriers, and NPU model porting through RKNN-Toolkit2 from PyTorch, ONNX, TensorFlow and Caffe. The engineering desk at Longgang performs the port itself, which matters because an unmodified vendor BSP rarely matches a customer carrier revision.
What about software updates and long-term support on the WF-RK3588?
Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android, Ubuntu LTS and Yocto firmware tracks. AndroidSBC also runs an OTA service that partners can use to push firmware and NPU model updates to deployed units. On long-lifecycle industrial AI programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.
Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?
Answer: Yes, including DDP into Amazon FBA in the US, EU and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.
How does AndroidSBC handle RMA or DOA replacements on the WF-RK3588?
Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-RK3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-RK3588-C4 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record is attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a 16-channel AI NVR line is offline.
Contact AndroidSBC: Start Your WF-RK3588-C4 Sourcing Conversation
The AndroidSBC export desk handles all WF-RK3588 enquiries from Ljubljana and Slovenia. Direct factory contact on the WF-RK3588-C4 and the rest of the smart cockpit and in-vehicle ai line is available through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Destination market file: CE marking with AKOS radio interface notification for Slovenia, administered by AKOS, entering at Port of Koper on the Koper to Ningbo lane
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
OEM and ODM enquiries move fastest when the first message carries the annual volume, the certification scope and the Incoterm. Send those three and the export desk replies with a per-lot quote and the full WF-RK3588 MOQ matrix inside two business days.