RK3588 Custom Digital Signage Board, WF-C3588-E7, AndroidSBC, Ljubljana

TL;DR: RK3588 Custom Digital Signage Board

SHENZHEN, China, September 12, 2026 - Wanlin Longgang released a 14,135-unit WF-C3588-E7 lot for Ljubljana, Slovenia this week, the 366th run booked against the Rockchip RK3588 allocation.

AndroidSBC customs and certification briefing for Rockchip RK3588 custom board shipments serving Ljubljana, Slovenia. The WF-C3588 line is a custom motherboard programme built on the Rockchip RK3588 octa-core platform (4x Cortex-A76 at 2.4GHz plus 4x Cortex-A55 at 1.8GHz on 8nm) with a triple-core NPU delivering 6 TOPS of INT8 inference, 8K H.265 decode and up to 32GB of LPDDR4X or LPDDR5. AndroidSBC, the export arm of Wanlin Manufacturing Group, builds nine custom variants at the Longgang source factory in Shenzhen for Ljubljana and Slovenia buyers: WF-C3588-A0 custom Android motherboards, WF-C3588-I1 custom industrial boards, WF-C3588-M2 core boards and SOMs with carrier design, WF-C3588-S3 custom signage and video wall boards, WF-C3588-K4 custom kiosk and POS boards, WF-C3588-R5 custom robotics controllers, WF-C3588-N6 custom NVR boards, WF-C3588-E7 custom edge AI boards, and WF-C3588-P8 custom ARM PC and NAS boards.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 is a nine-variant custom motherboard programme from AndroidSBC, the export arm of Wanlin Manufacturing Group in Shenzhen. One Rockchip RK3588 silicon, nine custom categories: custom Android motherboards, custom industrial boards, core board and SOM work, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant handles SMT, burn-in and pre-shipment inspection in one building, and the export desk handles the CE, FCC, UKCA, RoHS and IEC 62368-1 file per lot. For Slovenia importers, the line covers the custom board categories a Ljubljana distributor is most often asked to quote.

WF-C3588-E7 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-E7 (Custom Edge AI Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Slovenia importers sourcing the WF-Series, the 16GB + 64GB (WF-C3588-E7-C) variant is the typical configuration for the custom edge AI computing programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Edge AI Computing Board for Slovenia Buyers

Buyers in Ljubljana who have run the custom edge ai computing board category for a few years tend to stop shopping on price alone. The Rockchip RK3588 allocation is the real constraint, and it is the reason a 14,135-unit order can look cheap on paper and expensive in a slipped quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Ljubljana have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves all three risks inside the factory: the custom variant is assembled at Longgang, the certified image is burned on the same line, and the Technical File ships with the lot. Across the nine WF-C3588 variants the coverage runs from edge AI inference boxes, AI gateways, machine vision inspection, video analytics appliances, smart city nodes, factory AI retrofits, and edge computing servers, with three memory configurations per variant, so a Ljubljana buyer can usually match a requirement from the standard custom range.

Compliance for Slovenia is handled at the factory rather than after arrival. In Slovenia the market is small and is served largely along the Koper corridor together with Croatia and Austria. The Longgang export desk builds the destination-market file for CE marking with AKOS radio interface notification administered by AKOS and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Koper on the Koper to Ningbo lane.

Competitive Comparison: WF-C3588-E7 vs Competing RK3588 Boards

The comparison set for the custom edge ai computing board socket splits three ways: catalogue boards priced low with fixed everything, re-badged boards that cannot answer a schematic question, and custom platforms that take the I/O, memory and firmware changes in stride. The WF-C3588-E7 sits in the third group, differentiated by Rockchip RK3588, by customization depth, and by the factory-side certified image burn.

• vs GPU entry servers: the WF-C3588-E7 runs multi-model INT8 pipelines at a fraction of the power, which is what makes an unattended edge cabinet viable.
• vs cloud-analytics appliances: inference stays local on the 6 TOPS NPU, so the site keeps running when the uplink does not.
• vs NPU-less gateways: the board replaces the gateway plus a separate vision box with one SKU and one firmware line.
• vs assembled white boxes: Longgang validates the NPU runtime, the thermal profile and the appliance chassis together before the lot ships.

Global Custom Edge AI Computing Board Market Trends

Order timing in Ljubljana now tracks the Custom Edge AI Computing Board curve rather than the calendar-year budget. MarketsandMarkets sizes the Edge AI hardware segment at USD 26.9 billion for 2025 with a 32.7 percent CAGR through 2030 (MarketsandMarkets, 2025-2030), the silicon baseline that Slovenia buyers keep on the desk when they negotiate custom board allocation. Three patterns are visible in the WF-C3588 book:

• Retail analytics box: a mall operator counts dwell time and demographics locally across hundreds of fanless nodes.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-E7 board carries that headroom without a board change.
• Smart city intersection: a traffic programme runs vehicle and pedestrian analytics on one sealed node per junction.

For the Custom Edge AI Computing Board category the practical signal in Slovenia is that framework agreements are replacing spot buying, and the agreements are getting longer.

In all three cases, Ljubljana buyers are converting spot quotes into blanket orders with a monthly lot release, because a custom motherboard programme that has to hold a twelve-month shipping window cannot tolerate a mid-year allocation break.

Partner Success Story: Iris Building Systems in Ljubljana, Slovenia

Iris Building Systems, a smart building integrator serving the Slovenia market, deployed 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme. The rollout covered the retail analytics box, smart city intersection, and healthcare kiosk analytics workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme
• Region: Ljubljana, Slovenia
• Models used: WF-C3588-E7 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Nansha with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Koper via the Koper to Ningbo lane

"We specified the I/O count, they routed the board. The DIN-rail clip, the conformal coating and the dual GbE uplinks were all line items on one quote from one factory, which is the entire reason we stopped shopping integrator bundles."

- Liang Chen, Systems Director

Field Report: a self-service kiosk fleet rollout in Ljubljana, where 14,135 units of the WF-C3588-E7 board are being fitted into payment terminals across a retail estate

Reporter Lin Yu, on the ground in Ljubljana, Slovenia. The integrator staged the WF-C3588-E7 boards at a regional depot, flashed the estate image, and shipped them to stores in waves of forty. Each terminal was paired to the payment application at the store, and the depot kept a rolling stock of pre-flashed boards so a failed unit could be swapped inside a single service visit.

A spare-parts kit was packed alongside the order so the destination depot could swap a board without waiting on a cross-border shipment.

The inspection confirmed three things on the spot: the WF-C3588-E7 units hold the burn-in with a yield above 99.35 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with AKOS radio interface notification administered by AKOS, cleared for entry at Port of Koper on the Koper to Ningbo lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Slovenia importers can hand straight to their customs broker.

Filed by Lin Yu, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-E7 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-E7 (Custom Edge AI Computing Board) as the lead SKU for Ljubljana and Slovenia programmes:

• Retail analytics box: a mall operator counts dwell time and demographics locally across hundreds of fanless nodes.
• Factory vision retrofit: an assembly line adds defect classification without touching the PLC, using the multi-model pipeline.
• Smart city intersection: a traffic programme runs vehicle and pedestrian analytics on one sealed node per junction.
• Power grid substation: a utility reads gauges and thermal cameras locally over dual GbE back to the SCADA room.
• Agriculture edge node: a farm runs crop and pest models offline where connectivity is seasonal at best.
• Healthcare kiosk analytics: a clinic chain triages queues with on-device vision and no personal data leaving the site.
• Campus safety system: a university estate runs perimeter and corridor analytics with local alarm relay.
• Transit hub appliance: a station operator streams platform analytics to a control room over the optional 5G seat.

Partnership Models for Ljubljana Buyers

For Ljubljana importers and brand owners, the WF-C3588-E7 and the rest of the WF-C3588 custom variants are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever tier a Slovenia partner picks, the goods leave Longgang with one documentation pack covering CE, FCC, UKCA, RoHS and IEC 62368-1. The usual first order on the WF-C3588-E7 is the 16GB + 64GB (WF-C3588-E7-C) configuration at MOQ 5,000 units, samples in 1-3 days on standard variants and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how Slovenia partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Samples of standard variants leave the factory in 1-3 days. Custom builds run 15-30 days to mass production once the design is signed off, with the schematic review and carrier design handled in the same window. MOQ sits at 5,000 units per shipment on standard configurations, custom runs are quoted against volume, and small pilot batches are accepted for first-article programmes.

What certifications does a custom board need for Slovenia, and who handles them?

Answer: AndroidSBC handles them at the factory. Every lot ships with a Declaration of Conformity and a Technical File covering CE (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), FCC Part 15, UKCA where relevant, RoHS 2.0 and the REACH declaration, all dated within the prior twelve months. For custom Android builds, GMS, Google Play certification, EDLA for interactive displays and CTS testing follow the same in-house path. Where a Slovenia market needs an additional national mark, the export desk confirms coverage before the order is confirmed rather than after.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum, written into the framework agreement. The RK3588 platform carries a long industrial lifecycle, and Wanlin commits to the supply window, to security patches across the Android, Ubuntu LTS, Debian LTS and Yocto tracks, and to OTA update infrastructure for field-deployed units. For a custom board that is the whole point of going to a source factory: the product lifecycle is a contract term, not a hope.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-E7 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a Slovenia integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-E7 Sourcing Conversation

The AndroidSBC export desk handles all WF-C3588 enquiries from Ljubljana and Slovenia. Direct factory contact for the custom edge ai computing board is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with AKOS radio interface notification for Slovenia, administered by AKOS, entering at Port of Koper on the Koper to Ningbo lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start a custom review, send the target volume, the I/O and memory changes required, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-C3588 variants within two business days.