RK3399 Government Service Terminal Board for Social Security, WF-S3399, AndroidSBC, Ljubljana

TL;DR: RK3399 Government Service Terminal Board for Social Security

AndroidSBC release: twelve-model WF-S government service kiosk motherboard family opens for volume orders serving Ljubljana, Slovenia. The WF-S3399 government service kiosk Android motherboard spans the dual-screen high definition service terminal and eleven sister models in the WF-S series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, dual 4K output, HDMI plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-S family from the Longgang source factory in Shenzhen to Ljubljana and Slovenia importers who run citizen service hall, tax and social security counter, certificate printing, identity verification, public information display and outdoor smart city programmes.

About AndroidSBC and the Government Service Kiosk Android Motherboard Family

The WF-S family exists because public sector procurement rarely buys one board. A citizen service hall needs an enquiry screen, a payment point, a certificate printer and an identity verification terminal, and those four jobs do not want the same silicon. AndroidSBC puts eight Rockchip and Allwinner platforms under one Android baseline so a Ljubljana integrator can mix tiers inside one Slovenia tender. For Slovenia importers the working rhythm in Ljubljana is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-S3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-S3399 (dual-screen high definition service terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Slovenia importers sourcing the WF-S family, the WF-S3399-A variant is the typical configuration for the high resolution citizen information terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Government Service Kiosk Android Motherboards for Slovenia Buyers

The practical failure mode in Slovenia estates is the unattended restart. A terminal that needs a staff member to walk over and power it after an outage has not solved the problem the kiosk was bought to solve.

For identity work AndroidSBC wires the trust chain at board level: secure boot, a trusted execution environment, hardware-backed key storage and an audit log that survives a power cycle, which is what a Slovenia acceptance test asks to see. AndroidSBC has now closed the 3rd consecutive quarterly window on this family, with 17900 boards scheduled for Ljubljana and Slovenia on the Hamburg - Shenzhen lane as of September 20, 2026.

Competitive Comparison: WF-S3399 vs Competing Government Service Kiosk Android Boards

The WF-S family is specified against the alternatives a Ljubljana integrator actually shortlists: a single-platform board vendor, a board shipped without drivers, a board without unattended-operation features, and a board that cannot drive two panels independently.

• vs single-platform board vendors: the WF-S family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-S family arrives with capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay drivers already integrated, so the {city} integrator writes the citizen service application rather than the driver layer.
• vs boards without unattended-operation features: the WF-S family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-S family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a citizen screen plus an operator screen and a mirrored duplicate.

Global Government Self-Service / Citizen Service / Public Information Terminal Market Trends

AndroidSBC reads the public-sector figures as a demand baseline, not a forecast: dual-screen high definition service terminal programmes in Slovenia convert into board orders at a rate set by hall count and terminal density, and both are visible in Ljubljana tender calendars well before the order lands.

• Citizen service halls and municipal counters: WF-S3399 is the usual starting point for hall rollouts, with the dual-screen WF-S1331 as the citizen plus operator option.
• Tax, social security and housing fund terminals: the mid-tier WF-S1331 and the printing-capable WF-S6180 sister SKUs form the counter ladder, with certificate printing and queue management.
• Outdoor and 24-hour unattended cabinets: WF-S6180 and the industrial sister SKUs cover continuous-operation municipal self-service points across a city estate.

For Ljubljana buyers the takeaway is narrow: specify the Slovenia compliance set and the identity peripheral at the same time as the silicon, or the estate gets re-qualified later.

Partner Success Story: Nordweg Service Terminale (public administration terminal specialist)

A Nordweg Service Terminale rollout in the Northern Europe government segment shows how the WF-S government service kiosk Android motherboard family works in practice for Ljubljana integrators. Nordweg Service Terminale installed 17900 WF-S service boards across tax offices and population registries on a regional administration network.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Service Terminale branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AKOS conformity, all bundled into the Shenzhen source-factory shipment.

As Nordweg Service Terminale Network Operations Lead for Northern Europe Government explained: Nordweg Service Terminale picked the WF-S because a public counter has to open on time every morning, and the auto power-on and watchdog behaviour on the board removed a class of morning callouts for the 17900 terminals now live across Slovenia.

Field Report: dual-screen information terminal rollout at a public security service hall

SHENZHEN, September 20, 2026 - Gao Feng, AndroidSBC field desk. Technicians at the Longgang line re-ran the ID card reader and thermal printer handshakes on every WF-S3399 board in the lot, because those two peripherals are where a Slovenia rollout tends to stall. The WF-S3399 government service kiosk Android motherboard order for Ljubljana, Slovenia cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-S3399 dual-screen high definition service terminal production lot includes the WF-S3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Slovenia integrators, the AKOS conformity plus CE marking with AKOS radio interface notification paperwork is bundled.

Filed by Gao Feng, AndroidSBC field desk, SHENZHEN. Slovenia integrators typically request CE plus local radio interface notification for government service kiosk board deployments.

WF-S3399 Application Scenarios

The WF-S3399 dual-screen high definition service terminal sits inside a twelve-variant WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-S3399-A configuration is the typical build for the high resolution citizen information terminal use case, with identity peripheral driver SDK and staged OTA management bundled.

• Citizen service hall enquiry and queue points: WF-S3399 plus WF-S5270 form the hall entry ladder, with independent dual display output and 4K HDMI.
• Tax, social security and housing fund counters: WF-S5270 plus WF-S8800 are the usual pairing where certificate printing and ID verification run on the same board.
• Immigration and public security checkpoints: WF-S8800 is the dedicated secure identity SKU, with secure boot, trusted execution and an audit trail that survives a power cycle.
• AI identity verification and face recognition terminals: WF-S8801 plus WF-S3600 cover the vision and verification workload on the device.
• Community and neighbourhood service desks: the compact WF-S3399 and the entry-tier sister SKUs serve walk-in enquiry where counter space is limited.
• Outdoor and semi-outdoor municipal cabinets: the industrial T527 sister SKU takes the 24-hour unattended points that see a full seasonal temperature range in Ljubljana.
• Hall notice and announcement networks: the H618 and A133 sister SKUs drive continuous-play public information screens across a Ljubljana building estate.
• Document scanning and form filling terminals: WF-S3600 plus WF-S5270 pair the scanner and the signature pad on one board for the Ljubljana administration.
• Legacy estate refresh programmes: the RK3288 and RK3399 sister SKUs match the mechanical and electrical footprint of existing Ljubljana hall terminals, so a refresh does not become a redesign.

Partnership Models for Ljubljana Buyers

For Ljubljana and Slovenia partners the commercial question is how much of the design they want to own, and AndroidSBC answers it with three tracks on one WF-S platform.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Ljubljana, which is common when a distributor wins a tender that turns into a private-label line for Slovenia.

Frequently Asked Questions

Does the WF-S government service kiosk Android motherboard family support a dual-screen high definition service terminal?

Answer: Yes. The dual-screen high definition service terminal is a stock configuration on the WF-S government service kiosk Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same identity peripheral interface before shipment to Ljubljana.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-S family?

Answer: Eight tiers exist because public sector estates are not uniform. The RK3399 covers one band of that range, and AndroidSBC keeps the firmware, the driver SDK and the support window identical across all eight so a mixed Slovenia estate stays manageable.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Slovenia?

Answer: Yes. AndroidSBC treats paperwork as part of the product for Slovenia: CE marking with AKOS radio interface notification documentation and the AKOS conformity file are generated per board revision and handed over with the Ljubljana order.

What are the MOQ and lead time for a first order of the WF-S government service kiosk Android motherboard family?

Answer: AndroidSBC accepts single-piece sample orders for Ljubljana evaluation, 100 pieces for private label and 500 pieces for custom carrier board work. Mass production runs 15-30 days after BOM sign-off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-S family?

Answer: Yes, and the custom image is maintained rather than handed over. AndroidSBC builds custom Android ROM or Linux BSP for Slovenia programmes and keeps it current through the seven-year firmware window that applies in Ljubljana.

How are software updates and long-term support handled on the WF-S family?

Answer: AndroidSBC maintains the WF-S baseline for seven years and delivers it as staged OTA with rollback, which is what lets a Ljubljana administration apply updates without taking counters out of service.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-S family?

Answer: Yes, and the paperwork is prepared at the factory. AndroidSBC ships WF-S boards to Amazon FBA or to a 3PL consolidation point for Ljubljana and Slovenia with carton and pallet labelling completed in Shenzhen.

How are RMA and DOA replacements handled on the WF-S government service kiosk Android motherboard family?

Answer: DOA is replaced on the next shipment and RMA is handled within the seven-year support window, with the Ljubljana and Slovenia lot record used to confirm the revision and the peripheral configuration.

Contact AndroidSBC: Start Your WF-S3399 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-S family. Ljubljana integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Ljubljana and Slovenia buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.