Query Scanner Board Export for Hospital Information Point, WF-K3288, AndroidSBC, Ljubljana

TL;DR: Query Scanner Board Export for Hospital Information Point

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-K self-service query board family serving Ljubljana, Slovenia. The WF-K3288 self-service query terminal Android motherboard spans the legacy query terminal refresh with hall display and eleven sister models in the WF-K series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, 1080p HDMI plus LVDS, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Ljubljana and Slovenia importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group. Its WF-K series addresses the self-service query terminal segment with twelve boards on eight chips, all produced in the Longgang source factory in Shenzhen. Ljubljana and Slovenia buyers typically start from one pilot model and then scale the same board across a wider estate. The factory ships to Slovenia on a factory-direct basis, with the driver SDK, compliance files and mounting drawings bundled into the same carton as the boards.

WF-K3288 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3288 (legacy query terminal refresh with hall display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Slovenia importers sourcing the WF-K family, the WF-K3288-A variant is the typical configuration for the installed-base query terminal refresh use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Slovenia Buyers

The hard part of a query terminal project in Slovenia is rarely the processor. It is keeping the touch controller, the printer firmware and the peripheral interfaces on one qualified baseline while Ljubljana rolls the same board across very different sites.

Public-sector tenders in Ljubljana now ask for the compliance chain up front. The CE marking with AKOS radio interface notification route used in Slovenia has to be traceable from the board label back to the test house, which is a sourcing criterion rather than a formality. AndroidSBC deals with it by treating the Ljubljana requirement as one lot of 180700 units on one BOM, quoted on September 22, 2026 and shipped over the Hamburg - Shenzhen lane.

Competitive Comparison: WF-K3288 vs Competing Self-Service Query Terminal Android Boards

The comparison below reflects the configurations AndroidSBC ships to Ljubljana against the typical competing query board offered in Slovenia.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

Information access is being treated as infrastructure in Slovenia, and that changes what is procured. Instead of one-off kiosks, Ljubljana operators specify the legacy query terminal refresh with hall display as a standard unit to be repeated across a whole estate on the same firmware.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3288 and WF-K1330 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K1330 and WF-K1331 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K1331 over boards that re-spin silicon between lots.

That trend favours board-level suppliers in Slovenia: the Ljubljana buyer who can re-order the same part number two years later is the one who can keep an estate running.

Partner Success Story: Nordweg Innbyggertorg (municipal citizen service operator)

A Nordweg Innbyggertorg deployment in the Nordic public service segment illustrates how the WF-K query board family supports Ljubljana integrators. Nordweg Innbyggertorg deployed 180700 compact query terminals across municipal service points.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Innbyggertorg branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AKOS conformity, all bundled into the Shenzhen source-factory shipment.

Nordweg Innbyggertorg Programme Director for Nordic Public Service noted: Nordweg Innbyggertorg replaced counter-side lookup binders with the WF-K compact board, and 180700 units went into Ljubljana service points without any change to the existing counter furniture.

Field Report: installed-base query terminal refresh at a social security service hall

YANTIAN, Shenzhen, September 22, 2026 - Jin Tao, AndroidSBC field desk. The WF-K3288 run shipped with the legacy query terminal refresh with hall display profile pre-flashed, which shortens the commissioning step for Slovenia integrators. The WF-K3288 self-service query terminal Android motherboard order for Ljubljana, Slovenia cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-K3288 legacy query terminal refresh with hall display production lot includes the WF-K3288-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Slovenia integrators, the AKOS conformity plus CE marking with AKOS radio interface notification paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, YANTIAN, Shenzhen. Slovenia integrators typically request CE plus local radio interface notification for self-service query terminal board deployments.

WF-K3288 Application Scenarios

The WF-K3288 legacy query terminal refresh with hall display sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3288-A configuration is the typical build for the installed-base query terminal refresh use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K3288 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Ljubljana.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K6180 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K5270 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K8800 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K8801 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Ljubljana: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Ljubljana Buyers

The partnership structure offered to Ljubljana buyers is deliberately flexible: Slovenia integrators can take the board alone, take it with the driver stack, or take it as a private-label programme.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whatever track a Ljubljana partner selects, the underlying board, firmware baseline and compliance files are identical, which keeps Slovenia conversations about commercial terms rather than technical risk.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support a legacy query terminal refresh with hall display?

Answer: Yes, and it is qualified on the same production line as the rest of the family. The legacy query terminal refresh with hall display runs on the WF-K baseline image that Slovenia buyers receive, so there is no separate integration project.

What is the real difference between the RK3288 tier and the other silicon tiers in the WF-K family?

Answer: The RK3288 tier sits at a specific point on the price-versus-headroom curve. Below it the boards suit single-screen information lookup; above it they support dual-screen independent display and heavier video work, and AndroidSBC documents that mapping for Ljubljana buyers.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Slovenia?

Answer: Yes. Compliance files for Slovenia are bundled into the source-factory shipment to Ljubljana, and AndroidSBC provides the underlying test reports as well as the certificates on request.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: The first order MOQ on the WF-K family is set for pilot runs rather than container loads. Ljubljana buyers can start small, then scale once Slovenia field data is in hand, with 15-30 day bulk lead times.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. Custom ROM work on the WF-K family is scoped per Ljubljana project rather than sold as a generic service, which keeps the Slovenia deliverable tied to a specific deployment.

How are software updates and long-term support handled on the WF-K family?

Answer: Software updates on the WF-K family are staged rather than immediate, with rollback available at each step, which matters when a Ljubljana estate is live and Slovenia sites cannot tolerate an unplanned outage.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes. AndroidSBC regularly ships the WF-K family into Slovenia fulfilment centres on behalf of Ljubljana sellers, handling the labelling and carton marking at the source factory.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: RMA and DOA units are handled against the production lot, since every WF-K board is logged against its firmware revision and burn-in result before it leaves Shenzhen. Ljubljana partners report against the lot number and AndroidSBC matches it to the rig log.

Contact AndroidSBC: Start Your WF-K3288 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-K self-service query terminal family. Ljubljana integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Ljubljana and Slovenia the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.