POS Android Board in Stock, WF-P3566, AndroidSBC, Ljubljana

TL;DR: POS Android Board in Stock

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-P POS board family serving Ljubljana, Slovenia. The WF-P3566 POS Android motherboard spans the compact POS terminal for counter-limited checkout and eleven sister models in the WF-P series, all built on the RK3566 quad-core ARM Cortex-A55 1.8GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, LVDS output at 1080p, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Ljubljana and Slovenia importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC builds POS boards for the way retailers actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The WF-P family supports that pattern because the BOM is frozen per lot and the Ljubljana partner can re-order the same configuration eighteen months later and receive the same board. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Ljubljana partner can trace a single board back to its run.

WF-P3566 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3566 (compact POS terminal for counter-limited checkout) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Slovenia importers sourcing the WF-P family, the WF-P3566-A variant is the typical configuration for the small format store checkout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Slovenia Buyers

The second problem is the peripheral stack. A POS board is useless if the cash drawer does not fire, if the barcode scanner needs a driver nobody has, or if the customer display shows the cashier screen instead of the promotion loop.

Staged OTA is shipped as a tool, not a promise. A Ljubljana chain can push an update to a pilot group of lanes first, hold the rest, and roll back the image if the pilot shows a printer regression, all from the same console. 193700 WF-P boards cleared final test on September 23, 2026 for Ljubljana, booked on the Hamburg - Shenzhen lane. The country compliance note for Slovenia sat in the shipment folder alongside the peripheral validation report.

Competitive Comparison: WF-P3566 vs Competing POS Android Boards

What follows is not a spec-sheet comparison. It is the four questions a Ljubljana chain asks after its first failed rollout.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Unattended and self-service formats are the segment where the board specification bites hardest. A cabinet on a forecourt or in a store entrance has no staff to reset it, so the compact POS terminal for counter-limited checkout has to hold a watchdog, an RTC and a clean auto-recovery path.

• Entry counter tier: WF-P3566 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3399 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P1330 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The Slovenia demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the WF-P price list, MOQ and lead time because a Ljubljana partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)

A Nordweg Kasse Systemer deployment in the Nordic convenience retail segment illustrates how the WF-P POS board family supports Ljubljana integrators. Nordweg Kasse Systemer deployed 193700 WF-P boards across 140 convenience counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AKOS conformity, all bundled into the Shenzhen source-factory shipment.

Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail noted: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 193700 boards went into the Ljubljana estate without a driver change.

Field Report: small format store checkout deployment

NANSHAN, September 23, 2026 - Bei Chen, AndroidSBC field desk. On the Slovenia configuration the WF-P3566 ran kiosk-mode lockdown with a single merchant app, and the watchdog recovered the lane after each simulated mains dip. The WF-P3566 POS Android motherboard order for Ljubljana, Slovenia cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-P3566 compact POS terminal for counter-limited checkout production lot includes the WF-P3566-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Slovenia integrators, the AKOS conformity plus CE marking with AKOS radio interface notification paperwork is bundled.

Filed by Bei Chen, AndroidSBC field desk, NANSHAN. Slovenia integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P3566 Application Scenarios

The WF-P3566 compact POS terminal for counter-limited checkout sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3566-A configuration is the typical build for the small format store checkout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3566 drives the cashier screen while the second lane carries the customer display or the promotion wall in Ljubljana.
• Convenience and small format stores: the WF-P6180 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P5270 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7600 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7601 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Ljubljana: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Ljubljana Buyers

For Ljubljana and Slovenia buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and Slovenia partners usually convert within one quarter.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a compact POS terminal for counter-limited checkout?

Answer: It is. The WF-P family was specified around compact POS terminal for counter-limited checkout, and every board in the family is validated on that use case before it leaves the Longgang factory.

Which silicon tiers are available in the WF-P family for Slovenia buyers?

Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For Slovenia buyers the choice is driven by counter throughput and by whether the lane needs an NPU.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.

What is the minimum order quantity and the sample lead time for Slovenia?

Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Ljubljana partner can call off against a frame agreement rather than ordering in one block.

Is custom ROM, boot logo or pre-installed app development available?

Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.

How are firmware updates delivered to a Slovenia estate after deployment?

Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a Slovenia estate of several hundred lanes can be updated in waves rather than all at once.

What shipping terms does AndroidSBC support for Slovenia orders?

Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Ljubljana partner receives tracking with the lot.

What happens if a board fails in the field in Slovenia?

Answer: Each board carries a serial number logged against its burn-in record, so a field failure in Slovenia is traced to its production lot, and the replacement ships from the same frozen BOM.

Contact AndroidSBC: Start Your WF-P3566 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P POS board family. Ljubljana integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Ljubljana and Slovenia the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.