POS Motherboard Dual-Screen Independent Display for Restaurant Till, WF-P7600, AndroidSBC, Ljubljana

TL;DR: POS Motherboard Dual-Screen Independent Display for Restaurant Till

AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving Ljubljana, Slovenia. The WF-P7600 POS Android motherboard spans the dual-screen POS terminal with cashier and customer display and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, LVDS plus HDMI dual independent output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Ljubljana and Slovenia importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

The WF-P family covers the full span a Ljubljana retail group will meet in one refresh cycle: a 2GB entry counter board for small format stores, a 4GB dual-screen tier for restaurants, an 8GB AI tier for face payment, and a wide-temperature industrial tier for unattended cabinets that sit outside. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Slovenia, bundled with the lot so the importer clears customs without a second round of test reports.

WF-P7600 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7600 (dual-screen POS terminal with cashier and customer display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Slovenia importers sourcing the WF-P family, the WF-P7600-A variant is the typical configuration for the supermarket checkout lane rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Slovenia Buyers

Then there is the fiscal layer. In Slovenia the receipt has to be produced in a form the tax authority recognises, which means the printer handshake, the log retention and the receipt font set have to be right before the first store opens.

For payment certification AndroidSBC supplies the evidence pack rather than an opinion: the board-level security description, the trusted execution description where the tier supports it, and the AKOS route applied in Slovenia as a documented path the Ljubljana acquirer can audit. The Ljubljana frame agreement converted to a firm order on September 23, 2026 - 44400 boards, Hamburg - Shenzhen lane, one BOM, one firmware baseline, and the Slovenia compliance pack bundled.

Competitive Comparison: WF-P7600 vs Competing POS Android Boards

Competing boards reaching Ljubljana usually win on unit price and lose on everything that happens after the first container. The four points below are where that shows up.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Asia Pacific leads the market by value, North America follows, and the merchant mix in Slovenia sits somewhere between the two. For Ljubljana buyers the practical reading is that the same board family has to serve both a high-throughput supermarket lane and a single-counter boutique.

• Entry counter tier: WF-P7600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P7601 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P7602 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

AndroidSBC reads the Slovenia cycle as a firmware problem as much as a hardware one, which is why the seven-year update window is written into the WF-P family rather than offered as an option.

Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)

A recent Nordweg Kasse Systemer deployment in the Nordic convenience retail segment shows how the WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Ljubljana integrators. Nordweg Kasse Systemer deployed 44400 WF-P boards across 140 convenience counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AKOS conformity, all bundled into the Shenzhen source-factory shipment.

Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail highlighted: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 44400 boards went into the Ljubljana estate without a driver change.

Field Report: dual-screen checkout lane rollout at a regional supermarket group

NANSHAN, September 23, 2026 - Deng Hui, AndroidSBC field desk. Thermal behaviour was the last gate: the WF-P7600 finished the burn-in at the top of the temperature window rather than at 25C, which is the condition a sealed counter actually presents. The WF-P7600 POS Android motherboard order for Ljubljana, Slovenia cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-P7600 dual-screen POS terminal with cashier and customer display production lot includes the WF-P7600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Slovenia integrators, the AKOS conformity plus CE marking with AKOS radio interface notification paperwork is bundled.

Filed by Deng Hui, AndroidSBC field desk, NANSHAN. Slovenia integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P7600 Application Scenarios

The WF-P7600 dual-screen POS terminal with cashier and customer display sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7600-A configuration is the typical build for the supermarket checkout lane rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P7600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Ljubljana.
• Convenience and small format stores: the WF-P3600 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3601 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3602 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3566 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Ljubljana: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Ljubljana Buyers

The commercial structure below is what Ljubljana partners sign in practice - pick the one that matches how the business already buys.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

The Ljubljana partner keeps the commercial relationship; AndroidSBC keeps the factory discipline. That division is what makes the tracks work at volume.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen POS terminal with cashier and customer?

Answer: Supported. dual-screen POS terminal with cashier and customer is part of the standard WF-P configuration set, and the board ships to Ljubljana with the drivers and the firmware baseline already matched.

Which silicon tiers are available in the WF-P family for Slovenia buyers?

Answer: The family covers eight platforms from the RK3576 octa-core tier down to the A133 entry tier. The RK3576 board in this configuration is supported for seven years from release.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: One board handles all four. The driver SDK ships in the carton covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC, RFID, magnetic stripe, IC card, PIN pad and fingerprint reader.

What is the minimum order quantity and the sample lead time for Slovenia?

Answer: For Ljubljana buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.

How are firmware updates delivered to a Slovenia estate after deployment?

Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.

What shipping terms does AndroidSBC support for Slovenia orders?

Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Ljubljana partner books the lane that suits the import process.

What happens if a board fails in the field in Slovenia?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Ljubljana programme so the lane is not down for a full lead time.

Contact AndroidSBC: Start Your WF-P7600 Sourcing Conversation

For the WF-P POS Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Ljubljana integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Slovenia buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.