POS Board 4GB DDR4 for Pharmacy Counter, WF-P3602, AndroidSBC, Ljubljana

TL;DR: POS Board 4GB DDR4 for Pharmacy Counter

AndroidSBC peripheral desk: printer, scanner, cash drawer and payment reader driver SDK declared production-ready serving Ljubljana, Slovenia. The WF-P3602 POS Android motherboard spans the mobile handheld POS with 4G and barcode engine and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, MIPI DSI output at 720p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Ljubljana and Slovenia importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

Wanlin Manufacturing Group has been shipping Android boards out of Shenzhen for years, and the WF-P POS line is the branch aimed at checkout and payment counters. AndroidSBC publishes the price list, the MOQ and the lead time up front, because Slovenia importers comparing three Chinese factories need numbers they can put into a spreadsheet. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Slovenia, bundled with the lot so the importer clears customs without a second round of test reports.

WF-P3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Slovenia importers sourcing the WF-P family, the WF-P3602-A variant is the typical configuration for the tableside ordering handheld rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Slovenia Buyers

Payment certification is the third wall. EMV, PCI PTS and the local acquirer kernel all sit between a working prototype and a lane that can take a card, and Ljubljana integrators routinely lose months to a board vendor who has never seen a kernel test plan.

The last piece is the qualification run. Before a Slovenia rollout the partner sends the actual printer, scanner and drawer models to Longgang, AndroidSBC validates the combination on the bench, and the resulting configuration is locked as the reference for every later lot. For the Ljubljana programme the milestone landed on September 23, 2026: 69200 boards shipped on the Hamburg - Shenzhen lane, seven-year firmware window committed on the whole WF-P family.

Competitive Comparison: WF-P3602 vs Competing POS Android Boards

The WF-P family was specified against the failure modes Ljubljana chains reported on previous rollouts, which is why the comparison reads the way it does.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

The Slovenia picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Ljubljana integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.

• Entry counter tier: WF-P3602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P6180 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P5270 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The eight-tier WF-P line exists because Ljubljana rollouts are not uniform. One chain will use four of the twelve models, and the point is that all four share one driver contract.

Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)

The Nordweg Kasse Systemer rollout in the Nordic convenience retail segment shows how the WF-P family from AndroidSBC supports Ljubljana integrators. Nordweg Kasse Systemer deployed 69200 WF-P boards across 140 convenience counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AKOS conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 69200 boards went into the Ljubljana estate without a driver change.

Field Report: tableside ordering handheld rollout at a casual dining group

PINGHU, September 23, 2026 - Bin Yu, AndroidSBC field desk. The mobile handheld POS with 4G and barcode engine pilot in Slovenia used the WF-P3602 with 4G fallback, because several counters sit where fixed-line connectivity is unreliable. The WF-P3602 POS Android motherboard order for Ljubljana, Slovenia cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-P3602 mobile handheld POS with 4G and barcode engine production lot includes the WF-P3602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Slovenia integrators, the AKOS conformity plus CE marking with AKOS radio interface notification paperwork is bundled.

Filed by Bin Yu, AndroidSBC field desk, PINGHU. Slovenia integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P3602 Application Scenarios

The WF-P3602 mobile handheld POS with 4G and barcode engine sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3602-A configuration is the typical build for the tableside ordering handheld rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Ljubljana.
• Convenience and small format stores: the WF-P7600 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P7601 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7602 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Ljubljana: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Ljubljana Buyers

AndroidSBC does not force a track on Slovenia partners. The three below are the ones that actually get used.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

All three tracks give Ljubljana partners the same thing underneath: a factory-built board, a frozen BOM and a firmware window measured in years rather than months.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a mobile handheld POS with 4G and barcode engine?

Answer: Yes - mobile handheld POS with 4G and barcode engine is supported across the WF-P line, and the Ljubljana configuration is locked as the reference for later lots so re-orders behave identically.

Which silicon tiers are available in the WF-P family for Slovenia buyers?

Answer: Eight silicon tiers are offered, and the RK3568 platform sits in the middle of the range. Each tier carries the same peripheral interface contract, so a Ljubljana partner can move between them without re-writing drivers.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: It can. The WF-P family is specified so one board carries the full counter harness: printer, scanner, drawer, customer display and payment reader, with no expansion card required.

What is the minimum order quantity and the sample lead time for Slovenia?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Ljubljana partner keeps the same image across re-orders.

How are firmware updates delivered to a Slovenia estate after deployment?

Answer: The OTA channel is staged and reversible. A Ljubljana chain pushes to a pilot group first, and if a printer or drawer regression appears the image rolls back to the previous build.

What shipping terms does AndroidSBC support for Slovenia orders?

Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Ljubljana partner picks the term and AndroidSBC books the lane.

What happens if a board fails in the field in Slovenia?

Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the BOM, and ships a replacement from the Ljubljana call-off stock or the next production slot.

Contact AndroidSBC: Start Your WF-P3602 Sourcing Conversation

Ljubljana integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Slovenia buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.